Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.38 (GENERIC.MP) #0: Wed Nov 28 13:00:56 CST 2007
	wulf@hotdog:/usr/obj/sys/arch/i386/compile/GENERIC.MP
total memory = 3326 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3253 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfa000
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 2996.28 MHz, id 0x6f7
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: ITLB 128 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1308 mV) 2400 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: calibrating local timer
cpu0: apic clock running at 332 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Core 2 (Merom) (686-class), 2996.18 MHz, id 0x6f7
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu1: "Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 4 MB 64B/line 16-way
cpu1: ITLB 128 4 KB entries 4-way
cpu1: using thermal monitor 1
cpu2 at mainbus0 apid 3: (application processor)
cpu2: Intel Core 2 (Merom) (686-class), 2996.29 MHz, id 0x6f7
cpu2: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu2: "Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz"
cpu2: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu2: L2 cache 4 MB 64B/line 16-way
cpu2: ITLB 128 4 KB entries 4-way
cpu2: using thermal monitor 1
cpu3 at mainbus0 apid 2: (application processor)
cpu3: Intel Core 2 (Merom) (686-class), 2996.27 MHz, id 0x6f7
cpu3: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu3: "Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz"
cpu3: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu3: L2 cache 4 MB 64B/line 16-way
cpu3: ITLB 128 4 KB entries 4-way
cpu3: using thermal monitor 1
ioapic0 at mainbus0 apid 4
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IntelR,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
IRDA (PNP0510) [Generic IRDA-compatible device] at acpi0 not configured
LPT1 (PNP0400) [Standard LPT printer port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PMIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
FWH (INT0800) [Intel FWH Random Number Generator] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNK0 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
EXPL (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 98.0C
acpitz0: critical 100.0C passive 40.0C
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82965G Host Bridge (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82965G PCI Express Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: NVIDIA product 0x0422 (rev. 0xa1)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 9)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 11)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci2 dev 0 function 0: JMicron Technology JMB361 SATA/PATA controller
jmide0: 1 PATA port, 1 SATA port
jmide0: interrupting at ioapic0 pin 16 (irq 10)
ahcisata0 at jmide0
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is unused
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is PATA
atabus2 at jmide0 channel 1
ppb2 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. A1 (0x2): ioapic0 pin 17 (irq 5)
msk0 at mskc0 port A: Ethernet address 00:15:58:9b:72:4f
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 23 (irq 10)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 5)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 18 (irq 9)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 10)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xf2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 1 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0xc0)
fwohci0: interrupting at ioapic0 pin 20 (irq 10)
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:24:46:55
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
emuxki0 at pci4 dev 4 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x07)
emuxki0: interrupting at ioapic0 pin 18 (irq 9)
emuxki0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
emuxki0: ac97: ext id 200<AMAP>
audio0 at emuxki0: full duplex, mmap, independent
joy0 at pci4 dev 4 function 1: Creative Labs PCI Gameport Joystick (rev 0x07)
joy0: joystick not connected
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801H LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801H Serial ATA RAID Controller (ICH8) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus3 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus4 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19 (irq 11)
iic0 at ichsmb0: I2C bus
Intel 82801H Thermal Controller (miscellaneous DASP) at pci0 dev 31 function 6 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[2]: Realtek ALC883 (rev. 0.2)
azalia0: codec[2]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio1 at azalia0: full duplex, independent
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <SONY    CD-RW  CRX140E, , A1.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus2 drive 1: <ST3120026A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(jmide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0(jmide0:1:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
pad0: Pseudo Audio Device
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
mskc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)