/* $NetBSD: mlx_pci.c,v 1.27 2018/12/09 11:14:02 jdolecek Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Andrew Doran. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1999 Michael Smith * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from FreeBSD: mlx_pci.c,v 1.4.2.4 2000/10/28 10:48:09 msmith Exp */ /* * PCI front-end for the mlx(4) driver. */ #include __KERNEL_RCSID(0, "$NetBSD: mlx_pci.c,v 1.27 2018/12/09 11:14:02 jdolecek Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ioconf.h" static void mlx_pci_attach(device_t, device_t, void *); static int mlx_pci_match(device_t, cfdata_t, void *); static const struct mlx_pci_ident *mlx_pci_findmpi(struct pci_attach_args *); static int mlx_v3_submit(struct mlx_softc *, struct mlx_ccb *); static int mlx_v3_findcomplete(struct mlx_softc *, u_int *, u_int *); static void mlx_v3_intaction(struct mlx_softc *, int); static int mlx_v3_fw_handshake(struct mlx_softc *, int *, int *, int *); #ifdef MLX_RESET static int mlx_v3_reset(struct mlx_softc *); #endif static int mlx_v4_submit(struct mlx_softc *, struct mlx_ccb *); static int mlx_v4_findcomplete(struct mlx_softc *, u_int *, u_int *); static void mlx_v4_intaction(struct mlx_softc *, int); static int mlx_v4_fw_handshake(struct mlx_softc *, int *, int *, int *); static int mlx_v5_submit(struct mlx_softc *, struct mlx_ccb *); static int mlx_v5_findcomplete(struct mlx_softc *, u_int *, u_int *); static void mlx_v5_intaction(struct mlx_softc *, int); static int mlx_v5_fw_handshake(struct mlx_softc *, int *, int *, int *); static struct mlx_pci_ident { u_short mpi_vendor; u_short mpi_product; u_short mpi_subvendor; u_short mpi_subproduct; int mpi_iftype; } const mlx_pci_ident[] = { { PCI_VENDOR_MYLEX, PCI_PRODUCT_MYLEX_RAID_V2, 0x0000, 0x0000, 2, }, { PCI_VENDOR_MYLEX, PCI_PRODUCT_MYLEX_RAID_V3, 0x0000, 0x0000, 3, }, { PCI_VENDOR_MYLEX, PCI_PRODUCT_MYLEX_RAID_V4, 0x0000, 0x0000, 4, }, { PCI_VENDOR_DEC, PCI_PRODUCT_DEC_SWXCR, PCI_VENDOR_MYLEX, PCI_PRODUCT_MYLEX_RAID_V5, 5, }, }; static int mlx_pci_rescan(device_t self, const char *attr, const int *flag) { return mlx_configure(device_private(self), 1); } CFATTACH_DECL3_NEW(mlx_pci, sizeof(struct mlx_softc), mlx_pci_match, mlx_pci_attach, NULL, NULL, mlx_pci_rescan, NULL, 0); /* * Try to find a `mlx_pci_ident' entry corresponding to this board. */ static const struct mlx_pci_ident * mlx_pci_findmpi(struct pci_attach_args *pa) { const struct mlx_pci_ident *mpi, *maxmpi; pcireg_t reg; mpi = mlx_pci_ident; maxmpi = mpi + sizeof(mlx_pci_ident) / sizeof(mlx_pci_ident[0]); for (; mpi < maxmpi; mpi++) { if (PCI_VENDOR(pa->pa_id) != mpi->mpi_vendor || PCI_PRODUCT(pa->pa_id) != mpi->mpi_product) continue; if (mpi->mpi_subvendor == 0x0000) return (mpi); reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); if (PCI_VENDOR(reg) == mpi->mpi_subvendor && PCI_PRODUCT(reg) == mpi->mpi_subproduct) return (mpi); } return (NULL); } /* * Match a supported board. */ static int mlx_pci_match(device_t parent, cfdata_t cfdata, void *aux) { return (mlx_pci_findmpi(aux) != NULL); } /* * Attach a supported board. */ static void mlx_pci_attach(device_t parent, device_t self, void *aux) { struct pci_attach_args *pa; struct mlx_softc *mlx; pci_chipset_tag_t pc; pci_intr_handle_t ih; bus_space_handle_t memh, ioh; bus_space_tag_t memt, iot; pcireg_t reg; const char *intrstr; int ior, memr, i; const struct mlx_pci_ident *mpi; char intrbuf[PCI_INTRSTR_LEN]; mlx = device_private(self); pa = aux; pc = pa->pa_pc; mpi = mlx_pci_findmpi(aux); mlx->mlx_dv = self; mlx->mlx_dmat = pa->pa_dmat; mlx->mlx_ci.ci_iftype = mpi->mpi_iftype; printf(": Mylex RAID (v%d interface)\n", mpi->mpi_iftype); /* * Map the PCI register window. */ memr = -1; ior = -1; for (i = 0x10; i <= 0x14; i += 4) { reg = pci_conf_read(pa->pa_pc, pa->pa_tag, i); if (PCI_MAPREG_TYPE(reg) == PCI_MAPREG_TYPE_IO) { if (ior == -1 && PCI_MAPREG_IO_SIZE(reg) != 0) ior = i; } else { if (memr == -1 && PCI_MAPREG_MEM_SIZE(reg) != 0) memr = i; } } if (memr != -1) if (pci_mapreg_map(pa, memr, PCI_MAPREG_TYPE_MEM, 0, &memt, &memh, NULL, NULL)) memr = -1; if (ior != -1) if (pci_mapreg_map(pa, ior, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL)) ior = -1; if (memr != -1) { mlx->mlx_iot = memt; mlx->mlx_ioh = memh; } else if (ior != -1) { mlx->mlx_iot = iot; mlx->mlx_ioh = ioh; } else { aprint_error_dev(self, "can't map i/o or memory space\n"); return; } /* Enable the device. */ reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, reg | PCI_COMMAND_MASTER_ENABLE); /* Map and establish the interrupt. */ if (pci_intr_map(pa, &ih)) { aprint_error_dev(self, "can't map interrupt\n"); return; } intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf)); mlx->mlx_ih = pci_intr_establish_xname(pc, ih, IPL_BIO, mlx_intr, mlx, device_xname(self)); if (mlx->mlx_ih == NULL) { aprint_error_dev(self, "can't establish interrupt"); if (intrstr != NULL) aprint_error(" at %s", intrstr); aprint_error("\n"); return; } /* Select linkage based on controller interface type. */ switch (mlx->mlx_ci.ci_iftype) { case 2: case 3: mlx->mlx_submit = mlx_v3_submit; mlx->mlx_findcomplete = mlx_v3_findcomplete; mlx->mlx_intaction = mlx_v3_intaction; mlx->mlx_fw_handshake = mlx_v3_fw_handshake; #ifdef MLX_RESET mlx->mlx_reset = mlx_v3_reset; #endif break; case 4: mlx->mlx_submit = mlx_v4_submit; mlx->mlx_findcomplete = mlx_v4_findcomplete; mlx->mlx_intaction = mlx_v4_intaction; mlx->mlx_fw_handshake = mlx_v4_fw_handshake; break; case 5: mlx->mlx_submit = mlx_v5_submit; mlx->mlx_findcomplete = mlx_v5_findcomplete; mlx->mlx_intaction = mlx_v5_intaction; mlx->mlx_fw_handshake = mlx_v5_fw_handshake; break; } mlx_init(mlx, intrstr); } /* * ================= V3 interface linkage ================= */ /* * Try to give (mc) to the controller. Returns 1 if successful, 0 on * failure (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v3_submit(struct mlx_softc *mlx, struct mlx_ccb *mc) { /* Ready for our command? */ if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_FULL) == 0) { /* Copy mailbox data to window. */ bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh, MLX_V3REG_MAILBOX, mc->mc_mbox, 13); bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh, MLX_V3REG_MAILBOX, 13, BUS_SPACE_BARRIER_WRITE); /* Post command. */ mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_FULL); return (1); } return (0); } /* * See if a command has been completed, if so acknowledge its completion and * recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v3_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status) { /* Status available? */ if ((mlx_inb(mlx, MLX_V3REG_ODB) & MLX_V3_ODB_SAVAIL) != 0) { *slot = mlx_inb(mlx, MLX_V3REG_STATUS_IDENT); *status = mlx_inw(mlx, MLX_V3REG_STATUS); /* Acknowledge completion. */ mlx_outb(mlx, MLX_V3REG_ODB, MLX_V3_ODB_SAVAIL); mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK); return (1); } return (0); } /* * Enable/disable interrupts as requested. (No acknowledge required) * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v3_intaction(struct mlx_softc *mlx, int action) { mlx_outb(mlx, MLX_V3REG_IE, action != 0); } /* * Poll for firmware error codes during controller initialisation. * * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v3_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2) { u_int8_t fwerror; /* First time around, clear any hardware completion status. */ if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) { mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK); DELAY(1000); mlx->mlx_flags |= MLXF_FW_INITTED; } /* Init in progress? */ if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_INIT_BUSY) == 0) return (0); /* Test error value. */ fwerror = mlx_inb(mlx, MLX_V3REG_FWERROR); if ((fwerror & MLX_V3_FWERROR_PEND) == 0) return (1); /* Mask status pending bit, fetch status. */ *error = fwerror & ~MLX_V3_FWERROR_PEND; *param1 = mlx_inb(mlx, MLX_V3REG_FWERROR_PARAM1); *param2 = mlx_inb(mlx, MLX_V3REG_FWERROR_PARAM2); /* Acknowledge. */ mlx_outb(mlx, MLX_V3REG_FWERROR, 0); return (2); } #ifdef MLX_RESET /* * Reset the controller. Return non-zero on failure. */ static int mlx_v3_reset(struct mlx_softc *mlx) { int i; mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK); delay(1000000); /* Wait up to 2 minutes for the bit to clear. */ for (i = 120; i != 0; i--) { delay(1000000); if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_SACK) == 0) break; } if (i == 0) { /* ZZZ */ printf("mlx0: SACK didn't clear\n"); return (-1); } mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_RESET); /* Wait up to 5 seconds for the bit to clear. */ for (i = 5; i != 0; i--) { delay(1000000); if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_RESET) == 0) break; } if (i == 0) { /* ZZZ */ printf("mlx0: RESET didn't clear\n"); return (-1); } return (0); } #endif /* MLX_RESET */ /* * ================= V4 interface linkage ================= */ /* * Try to give (mc) to the controller. Returns 1 if successful, 0 on * failure (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v4_submit(struct mlx_softc *mlx, struct mlx_ccb *mc) { /* Ready for our command? */ if ((mlx_inl(mlx, MLX_V4REG_IDB) & MLX_V4_IDB_FULL) == 0) { /* Copy mailbox data to window. */ bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh, MLX_V4REG_MAILBOX, mc->mc_mbox, 13); bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh, MLX_V4REG_MAILBOX, 13, BUS_SPACE_BARRIER_WRITE); /* Post command. */ mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_HWMBOX_CMD); return (1); } return (0); } /* * See if a command has been completed, if so acknowledge its completion and * recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v4_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status) { /* Status available? */ if ((mlx_inl(mlx, MLX_V4REG_ODB) & MLX_V4_ODB_HWSAVAIL) != 0) { *slot = mlx_inb(mlx, MLX_V4REG_STATUS_IDENT); *status = mlx_inw(mlx, MLX_V4REG_STATUS); /* Acknowledge completion. */ mlx_outl(mlx, MLX_V4REG_ODB, MLX_V4_ODB_HWMBOX_ACK); mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_SACK); return (1); } return (0); } /* * Enable/disable interrupts as requested. * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v4_intaction(struct mlx_softc *mlx, int action) { u_int32_t ier; if (!action) ier = MLX_V4_IE_MASK | MLX_V4_IE_DISINT; else ier = MLX_V4_IE_MASK & ~MLX_V4_IE_DISINT; mlx_outl(mlx, MLX_V4REG_IE, ier); } /* * Poll for firmware error codes during controller initialisation. * * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v4_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2) { u_int8_t fwerror; /* First time around, clear any hardware completion status. */ if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) { mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_SACK); DELAY(1000); mlx->mlx_flags |= MLXF_FW_INITTED; } /* Init in progress? */ if ((mlx_inl(mlx, MLX_V4REG_IDB) & MLX_V4_IDB_INIT_BUSY) == 0) return (0); /* Test error value */ fwerror = mlx_inb(mlx, MLX_V4REG_FWERROR); if ((fwerror & MLX_V4_FWERROR_PEND) == 0) return (1); /* Mask status pending bit, fetch status. */ *error = fwerror & ~MLX_V4_FWERROR_PEND; *param1 = mlx_inb(mlx, MLX_V4REG_FWERROR_PARAM1); *param2 = mlx_inb(mlx, MLX_V4REG_FWERROR_PARAM2); /* Acknowledge. */ mlx_outb(mlx, MLX_V4REG_FWERROR, 0); return (2); } /* * ================= V5 interface linkage ================= */ /* * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure * (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v5_submit(struct mlx_softc *mlx, struct mlx_ccb *mc) { /* Ready for our command? */ if ((mlx_inb(mlx, MLX_V5REG_IDB) & MLX_V5_IDB_EMPTY) != 0) { /* Copy mailbox data to window. */ bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh, MLX_V5REG_MAILBOX, mc->mc_mbox, 13); bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh, MLX_V5REG_MAILBOX, 13, BUS_SPACE_BARRIER_WRITE); /* Post command */ mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_HWMBOX_CMD); return (1); } return (0); } /* * See if a command has been completed, if so acknowledge its completion and * recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v5_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status) { /* Status available? */ if ((mlx_inb(mlx, MLX_V5REG_ODB) & MLX_V5_ODB_HWSAVAIL) != 0) { *slot = mlx_inb(mlx, MLX_V5REG_STATUS_IDENT); *status = mlx_inw(mlx, MLX_V5REG_STATUS); /* Acknowledge completion. */ mlx_outb(mlx, MLX_V5REG_ODB, MLX_V5_ODB_HWMBOX_ACK); mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_SACK); return (1); } return (0); } /* * Enable/disable interrupts as requested. * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v5_intaction(struct mlx_softc *mlx, int action) { u_int8_t ier; if (!action) ier = 0xff & MLX_V5_IE_DISINT; else ier = 0xff & ~MLX_V5_IE_DISINT; mlx_outb(mlx, MLX_V5REG_IE, ier); } /* * Poll for firmware error codes during controller initialisation. * * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v5_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2) { u_int8_t fwerror; /* First time around, clear any hardware completion status. */ if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) { mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_SACK); DELAY(1000); mlx->mlx_flags |= MLXF_FW_INITTED; } /* Init in progress? */ if ((mlx_inb(mlx, MLX_V5REG_IDB) & MLX_V5_IDB_INIT_DONE) != 0) return (0); /* Test for error value. */ fwerror = mlx_inb(mlx, MLX_V5REG_FWERROR); if ((fwerror & MLX_V5_FWERROR_PEND) == 0) return (1); /* Mask status pending bit, fetch status. */ *error = fwerror & ~MLX_V5_FWERROR_PEND; *param1 = mlx_inb(mlx, MLX_V5REG_FWERROR_PARAM1); *param2 = mlx_inb(mlx, MLX_V5REG_FWERROR_PARAM2); /* Acknowledge. */ mlx_outb(mlx, MLX_V5REG_FWERROR, 0xff); return (2); } MODULE(MODULE_CLASS_DRIVER, mlx_pci, "mlx,pci"); #ifdef _MODULE /* * XXX Don't allow ioconf.c to redefine the "struct cfdriver ld_cd" * XXX it will be defined in the common-code module */ #undef CFDRIVER_DECL #define CFDRIVER_DECL(name, class, attr) #include "ioconf.c" #endif static int mlx_pci_modcmd(modcmd_t cmd, void *opaque) { int error = 0; #ifdef _MODULE switch (cmd) { case MODULE_CMD_INIT: /* * We skip over the first entry in cfdriver[] array * since the cfdriver is attached by the common * (non-attachment-specific) code. */ error = config_init_component(&cfdriver_ioconf_mlx_pci[1], cfattach_ioconf_mlx_pci, cfdata_ioconf_mlx_pci); break; case MODULE_CMD_FINI: error = config_fini_component(&cfdriver_ioconf_mlx_pci[1], cfattach_ioconf_mlx_pci, cfdata_ioconf_mlx_pci); break; default: error = ENOTTY; break; } #endif return error; }